Handheld Partial Discharge Tester
Posted Aug 03, 2022 | Hits: 119
Country:
China
https://www.mktester.com/transformer-tester/partial-discharge-detector/handheld-partial-discharge-tester.htmlProduct description:
Handheld partial discharge tester is a detection device for diagnosing power line faults and hidden troubles by collecting abnormal ultrasonic signal in power lines and then through software analysis. It can judge hidden fault position and fault type without power cut. The device collect abnormal ultrasonic signal by ultrasonic detector (ultrasonic sensor) , then transmit the signals to the host, diagnose the fault and hidden trouble type and severity level, and convert to audible sound signal and the output waveform. It can help inspectors accurately find out faults and hidden dangers, prevent malignant faults happening, avoid unnecessary power cut, increase the reliability of power supply, Improve the efficiency of inspection personnel, and reduce the labor intensity of inspection personnel.
Technical index:
System
WINCE6.0
CPU
Main frequency of 533MHz
Memory
RAM of 256MB DDR2, 1GB NandFlash
Screen
TFT true color touch screen of 4.3” ,resolution of 480 * 272
Interface
SD memory card,USB,serial port,earphones
SD memory card
TF card of more than 8G
Camera
3 mega-pixel high definition camera
Accessories
GPS,temperature /humidity measurement device,high brightness laser pointer
Storage function
GPS coordinate,time/date,temperature/humidity
Frequency range
20—150kHz
Sensor
40kHz x 1Ea
Working condition
-25℃ ~ 70℃
Relative humidity
0 - 95%
Charger specification
Input :100-240V, 50/60Hz
Output :voltage of 20V, current of 3.25A
Power supply
Battery power:lithium battery
Working hours:about 8 hours
Battery protection:LCD backlight will go dark, when there
is no operation within 5 minutes. The instrument will
automatically shutdown, when there is no operation within 20 minutes. When the battery power is less than 5%, system will beep hinting users to save data timely, then users need power it off and recharge.
Feature:
●Portable design, small size, light weight, and easy to carry , so that one person can operate.
●High brightness laser transmitter can realize fault location.
●3 mega-pixel high-definition camera can easily focus detection point of failure and take photos of tower identification and faulty equipment.
●Convert the abnormal ultrasonic signals detected by the instrument to audible sine signal and intuitive waveform, from which inspection personnel can clearly identify the discharge intensity.
●Embedded GPS receiver automatically stores the coordinate data and provides GPS navigation, which convenient for query and save detection path.
●With the function of testing temperature and humidity to test environmental temperature and humidity in real time.
●With data storage capability to realize data playback.
●The display is color touchscreen which is convenient for detection personnel to test and use.
Handheld partial discharge tester is a detection device for diagnosing power line faults and hidden troubles by collecting abnormal ultrasonic signal in power lines and then through software analysis. It can judge hidden fault position and fault type without power cut. The device collect abnormal ultrasonic signal by ultrasonic detector (ultrasonic sensor) , then transmit the signals to the host, diagnose the fault and hidden trouble type and severity level, and convert to audible sound signal and the output waveform. It can help inspectors accurately find out faults and hidden dangers, prevent malignant faults happening, avoid unnecessary power cut, increase the reliability of power supply, Improve the efficiency of inspection personnel, and reduce the labor intensity of inspection personnel.
Technical index:
System
WINCE6.0
CPU
Main frequency of 533MHz
Memory
RAM of 256MB DDR2, 1GB NandFlash
Screen
TFT true color touch screen of 4.3” ,resolution of 480 * 272
Interface
SD memory card,USB,serial port,earphones
SD memory card
TF card of more than 8G
Camera
3 mega-pixel high definition camera
Accessories
GPS,temperature /humidity measurement device,high brightness laser pointer
Storage function
GPS coordinate,time/date,temperature/humidity
Frequency range
20—150kHz
Sensor
40kHz x 1Ea
Working condition
-25℃ ~ 70℃
Relative humidity
0 - 95%
Charger specification
Input :100-240V, 50/60Hz
Output :voltage of 20V, current of 3.25A
Power supply
Battery power:lithium battery
Working hours:about 8 hours
Battery protection:LCD backlight will go dark, when there
is no operation within 5 minutes. The instrument will
automatically shutdown, when there is no operation within 20 minutes. When the battery power is less than 5%, system will beep hinting users to save data timely, then users need power it off and recharge.
Feature:
●Portable design, small size, light weight, and easy to carry , so that one person can operate.
●High brightness laser transmitter can realize fault location.
●3 mega-pixel high-definition camera can easily focus detection point of failure and take photos of tower identification and faulty equipment.
●Convert the abnormal ultrasonic signals detected by the instrument to audible sine signal and intuitive waveform, from which inspection personnel can clearly identify the discharge intensity.
●Embedded GPS receiver automatically stores the coordinate data and provides GPS navigation, which convenient for query and save detection path.
●With the function of testing temperature and humidity to test environmental temperature and humidity in real time.
●With data storage capability to realize data playback.
●The display is color touchscreen which is convenient for detection personnel to test and use.
0 comments on Handheld Partial Discharge Tester
Make a Comment
similar ads
Posted Jan 14, 2023 to Everything Else
Canada, Ontario, Etobicoke
Posted Jan 14, 2023 to Health & Beauty
https://www.outlookindia.com/outlook-spotlight/rejuvenate-cbd-gummies-shark-tank-scam-or-legit-20...
India, newyork
Posted Jan 14, 2023 to Health & Beauty
USA, CA, Los Angeles
Posted Jan 14, 2023 to Health & Beauty